How to Flash Samsung Wave 219 with Multiloader V565
If you have a Samsung Wave 219 phone that runs on Bada OS, you might want to flash it with a new firmware or ROM to upgrade its performance, features, or stability. One of the tools that you can use to flash your Samsung Wave 219 is Multiloader V565, a downloader software that supports various Samsung phone models based on different chipsets.
In this article, we will show you how to flash your Samsung Wave 219 with Multiloader V565 in a few simple steps. But before we begin, make sure you have the following things ready:
A Samsung Wave 219 phone with a fully charged battery.
A USB cable to connect your phone to your computer.
A backup of your phone data, as flashing will erase everything on your phone.
A compatible firmware or ROM file for your Samsung Wave 219. You can find some firmware files online, such as on XDA Forums [^1^] or X-DRIVERS.COM [^2^]. Make sure you download the correct file for your phone model and region.
A download of Multiloader V565 software. You can get it from here [^2^] or here [^3^]. Extract the zip file to a folder on your computer.
Once you have everything ready, follow these steps to flash your Samsung Wave 219 with Multiloader V565:
Turn off your Samsung Wave 219 and remove the SIM card and memory card.
Press and hold the Volume Down button and the Camera button, then press the Power button. This will put your phone in download mode.
Connect your phone to your computer using the USB cable. Your computer should recognize your phone as a USB device.
Open the folder where you extracted Multiloader V565 and run the Multiloader.exe file as administrator.
In the Multiloader window, select LSI as the chipset and check Full Download as the mode.
Click on Boot and browse to the folder where you downloaded the firmware or ROM file. Select the BOOTFILES folder and click OK.
Click on Amss and browse to the same folder. Select the apps_compressed.bin file and click OK.
Click on Rsrc1 and browse to the same folder. Select the Rsrc_S8500_Open_Europe_Common.rc1 file and click OK.
Click on Rsrc2 and browse to the same folder. Select the Rsrc2_S8500(Low).rc2 file and click OK.
Click on Factory FS and browse to the same folder. Select the FactoryFs_S8500_Open_Europe_Common.ffs file and click OK.
Click on CSC and browse to the same folder. Select the CSC_S8500_Open_Europe_Common_OXA_XXJL3.csc file and click OK.
Click on SHP APP and browse to the same folder. Select the ShpApp.app file and click OK.
Click on FOTA and browse to the same folder. Select the bplib_S8500M.fota file and click OK.
Make sure all the files are selected correctly and click on Download at the bottom of the Multiloader window.
The flashing process will begin and you will see a progress bar on your phone screen. Wait until it reaches 100% and do not disconnect your phone or turn off your computer during this process.